The order date is pre-assigned in the file creation.

The outbound hub determines which hub is responsible for the pickup at the pickup address.
→ This is always a required field.

The inbound hub determines which hub is responsible for the delivery at the delivery address.  

Here you can enter the project, provided that the shipment belongs to a project.

This field can be evaluated statistically later on in the process.

Here you can enter the international long-distance route.

• The LD route can be deposited in the basic data.

• The content can also be entered directly.

The entries for the LD route come from the basic data ORDERS → TRAFFIC AREAS.

Here you can enter the national short-distance route.

• The SD route can be deposited in the basic data in a route table.

• The content can also be entered directly.

The destination country and the zip code are determined from the delivery address or consignee address (if available). 
The correct SD route is determined depending on the values in the basic data table.
The SD route is then pre-assigned for the search.

Here you can enter the movement type.
Currently only the entry DIR controls the further performance in the disposition.  

Here you can define the pickup type.

The available entries are

• Customer delivery

• Local traffic

• Direct pickup.

If in the basic data Road parameter a pick up type is recorded, it will be pre-assigned.

Here you can define the delivery type.

The available entries are

• Customer pickup

• Local traffic

• Direct delivery.

If in the basic data Road parameter a delivery type is recorded, it will be pre-assigned.

This field generates an unambiguous (throughout the entire system) ID for this file.

If e.g. this file is sent to a different department via EDI and receives a new file number, the shipment ID remains.

You can select between

• Traffic national

• Traffic international

• Local traffic.

Date of departure date.

Date of arrival.

Here you can enter the delivery term.

• In the first field, you can enter the delivery term abbreviation. (e.g. EXW)

• The place of handover can be entered in the second field.

Additional data are necessary for the transfer to the Fortras interface.

These can be selected and entered here.

Please set the checkmark if this shipment includes dangerous goods.

A corresponding message is displayed in the order itself.

Open

If this checkbox is activated, a corresponding symbol appears next to the checkbox.
In the disposition, this symbol also appears in the overview of the tours, the shipments and the area with the routes on the tour.

If an attempt is made to set a route with temperature-controlled goods on a tour without this active checkbox, a message appears.

The address description (displayed in bold) describes the content of the address.
This assignment is done once in the basic data Codes in COMPANY.
It should not be modified afterwards.

The type of the address can be selected from a dropdown menu.

Available for selection are A, D, K, G and P.

You can either enter an abbreviation (matchcode) or the address number into the address line.
A search for the address can be started via double click or F2.

The entire address appears after the selection of the address number of the matchcode.

Here you can deposit an additional reference for this address that can also be included in the print.

Open

 It is also possible to deposit multiple references per address.

A mask opens, in which you can deposit additional references.

The addresses A2 and A3 have a date field in which you can enter a date and a time.

These information can be printed on the documents.
These dates are also displayed in the disposition.

• The Loading date from the header data is connected to the pickup date of the Transport tab.

• The Unloading date from the header data is connected to the final destination of the Transport tab.

The checkbox in front of an address is used to determine the customer for this shipment.

This address is e.g. pre-assigned as the bill-to-party in the invoicing.
Only one customer checkmark can be set.

Saving a file without customer checkmark is not possible.

The customer checkmark is set for address 5 (notify address) by default in the ROAD mode.

 A general address remark can be deposited per address in the address basic data.

An i is displayed next to the icon to indicate deposits.

 A mask for the credit limit check opens by clicking on the icon.

Here you can enter the shipper.

This is usually the pickup address as well.

The pickup address can be filled if it does not agree with the shipper address.

If available, this address is displayed instead of the shipper address in the tour planning.

This address block can be filled if it is necessary to indicate a notify address.

Here you can enter the consignee.

This is usually the delivery address as well.

The delivery address can be filled if it does not agree with the consignee address.

If available, this address is displayed instead of the consignee address in the tour planning.

Entry of the bill-to-party.

The customer checkmark is set for the bill-to-party by default.

Depending on the sector (Export: incoming forwarder/Import: freight forwarder), you can enter an agent.

This address is used to group the shipments by agents in the tour planning.

Here you can enter the transport company or the carrier.