All

Closes the file after the selected functions have been performed (no file closing). 

All

This checkbox is activated by default if your file is not yet assigned with an AWB number.

You can automatically draw an AWB number from the stock or HAWB number range or, if you select AWB no. manually, type the AWB number in.

You can configure a preallocation in basic data AIRFREIGHT → AIR PARAMETER → General tab.

→ General tab in AIR Parameter

All

Shows the security status of the shipment.
Use the update checkbox to have the program check for updates and update the status accordingly.

All

Activate the checkbox to start an instant print on the printer recorded in the basic data.

After you have activated the AWB print you are able to activate other functions, e.g. eAWB transmission to airline (Champ).

• If basic data ADMIN → STATUS TYPES contain a status for the print of HAWBs (filling rule 28) and MAWBs (filling rule 27), the corresponding status is automatically inserted in the file with the print.

→ Send AWB (FWB) to airline
→ 

Print, fax, email AWB

→ Status types in Status types in ADMIN

→ Fills field rules in Status events

All

According to legal requirements, the print date and time must correspond to the actual print.

Remove the checkmark to print the AWB date based on the AWB control tab.

→ AWB Control tab in AWB Main

Activate the checkbox to start an instant print on the printer recorded in the basic data.

The number of labels depends on the number of packages entered in the goods description.

→ Label print in the Airfreight menu

→ CONSOL
→ MAWB (B2B)
→ IATA 

The Print pouch label checkbox is only activated automatically if the following conditions are met:

• AWB Main tab:
  The checkbox eAWB is actived and eFreight = EAP

• Close ABW/F6 menu:
  Send AWB to airline checkbox is actived and has not yet been transmitted.

As soon as the AWB has been transmitted at least once, the Print pouch label function is NO LONGER activated automatically when the Send AWB to airline checkbox is activated.

• The report for the label is eaairpouchlabel.rpt und and must be recorded in basic data ADMIN → REPORTS with the report ID LABELPOU.
  The printer must be selected for the label in basic data ADMIN → FORMS.

→ Master and
→ Consol AWBs

The manifests are customized.

Activate the checkbox for the required manifest. The instant print is triggered automatically.

A  preallocation per DES agent for the required manifest can be made in the basic data ADDRESSES. 

→ Agent tab in ADDRESSES

→ Consol
→ B2B Master

Define in the master data which documents (MAWBs, HAWBs, manifests) the DES agent will receive by eMail as advice.

The default settings are made in the address master data of the DES agent.

→ Agent tab in ADDRESSES

→ B2B Master
→ Consol
→ IATA

All master files are sent to airlines (Master B2B, IATA AWB and consol files).

This function is only available for carriers that are activated for transmission in the basic data (FWB).

• MAWB (FWB) and HAWB (FHL) are sent to the airline.
  This requires a link to CHAMP (previously Traxon).

→ Pls see Send AWB (FWB) to airline.

→ Carrier in AIRFREIGHT

→ B2B Master
→ Consol
→ IATA
→ SMAWB send to

Depends on the configuration of interfaces.

This checkbox is pre-assigned if you have selected Print AWB or Send AWB to airline.

• Precondition for the transfer is that the qualifier AWBAP  is entered in the AWB agent on the EDI references sub-tab.

You alternatively have the option to select the EDI partner from the basic data after having confirmed the function in the F6 menu.

→ EDI references sub tab in Addresses

→ HAWB
→ Consol

This function can be activated through basic data AIR PARAMETER.

This function generates a psr. print file, which is sent via email and can be printed by the recipient.

This requires that the software of the recipient supports psr.AWB print files. 

 → General tab in AIR Parameter 

→ MAWB (B2B)
→ IATA
→ Consol 

To create automatic accruals in MAWB (B2B), IATA and Consol AWBs, the flag Create accruals for Airfreight must be set in the F6 menu.

The accrual amount is built from the airfreight charges and the other charges of the consol. 

→ Create automatic accruals Airfreight

→ B2B House
→ B2B Master
→ IATA

Book the accruals entered on the Other Charges tab.

→ Consol 
→ MAWB (B2B) 

The program retrieves the collect costs involved per HAWB and creates an invoice for the destination agent entered in address field A4.

It is possible to send the CC-invoice by email automatically.
For this it is necessary to select E-Mail only/Print and E-Mail in the basic data ADDRESSES.

In addition, an email address is mandatory.

• E-Mail only:
  No printout is created, the invoice is only sent to the recipient of the document by email

• Print and E-Mail:
  An email will be sent and the invoice will also be printed out.
  If 0 is entered as the number of printouts, the invoice will only be sent by email

After having created the CC invoice, you can no longer change the currency or voucher files. 

→ ADDRESSES → General tab → Invoice data sub tab → Section Invoice distribution → field Distribute via.

This option is only available if it has been activated in the AIR PARAMETERS (administrator).
All MRNs must be printed on the AWB in connection with the 2-stage export procedure.
CargoSoft automatically generates an attachment with all MRNs if the space on the AWB is not sufficient.
The checkbox is pre-assigned accordingly.
You can also activate the checkbox if the space on the AWB is enough but you would like ot print an attachment nonetheless.

The print of the MRN attachment is possible even if the checkbox Print AWB has not been activated.

This field in the F6 menu is pre-assigned if MRNs with indicator ZA=N (checkbox not active) are available in airfreight export files.

→ Consol tab in AIR Parameter

→ Consol

The complete gateway billing is explained here.

→ Gateway billing Airfreight